Billyoh Mia 19351, Руководство по сборке

Страница: 9 / 15

Tools
Step
10
Following the same process in stage 4, lay the next
board levels onto the assembly to finalise the base
walls. Ensure that the boards are level and flush
with each other as you lay each one.
Tools
Step
12
Proceed onto the next layer of the gable, by following
the process in stage 11. Ensure the boards are level
and are interlocking with one another. Fix in place
with 50mm screws.
Tools
Step
11
Place the first gable board on each side wall of the
cabin, followed by the full length front wall board.
Note: Review your technical document to check the
gable boards used.
Tools
Step
13
Place the final gable board as shown, whilst fixing in
place with 50mm screws. Ensure your gable is level
and affixed correctly before proceeding.
Tools
Step
14
To ensure the window frames are secured into
position, affix as shown using 30mm screws. Ensure
your window frame is level before fixing into position.
Tools
Step
15
Begin fixing the framing around all four walls of the
cabin using 30mm screws.
These will need cutting to
size, therefore, please review the technical document for
measurements to cut the framing to size.