57
WDS Service:
The default setting is disabled.
Check
Enable
radio button to activate this function.
1. Peer WDS MAC Address:
It is the associated AP’s MAC Address. It is important that your
peer’s AP must include your MAC address in order to acknowledge and communicate with
each other.
2. Peer WDS MAC Address:
It is the second associated AP’s MAC Address.
3. Peer WDS MAC Address:
It is the third associated AP’s MAC Address.
4. Peer WDS MAC Address:
It is the fourth associated AP’s MAC Address.
Note: For MAC Address, the format can be: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx.
Click Apply to confirm the settings.
You can click Security settings link next to Cancel button to go to Wireless Security screen (see
Wireless Security
section).
Содержание BiPAC 8200N
