Bilanciai PS440 Series, Руководство по эксплуатации и обслуживанию

Страница: 79 / 110

79
DS440IS
6.8.4 Data displayed with extraction activated
The following information is displayed in this page:

the gross weight measured by the scale (preceded by the word "Weight") and its metrological
indications (stable weight, center zero, minimum weight indications, etc.);

the extracted weight (with the word "Extracted" over it);

error indications or messages that concern the extraction (in the bottom centre of the display);

the toolbar that always indicates the functions available in the current status (last line on the
display).
The extraction in progress can always be interrupted from this page with the STOP key.
Remember that the "Stop" key shuts down the extraction operation in advance and that during the
installation phase, the user can decide whether cycles shut down in this way must be printed,
totalized or rejected. Even if cycles shut down with stop must be rejected, the terminal still waits for
the stable weight condition after extraction has been interrupted in order to activate the "End of
extraction" output.
An input contact with the same function as the "stop" key can be enabled when the terminal is
installed.