89
DS440IS
6.13 Preset weight options
The preset weight options are used when the first weight (or tare) of a vehicle is known and therefore
does not need to be weighed.
The preset weights are associated with a code that can be used to recall them.
Besides the preset weight, each code can also store auxiliary information such as the product code
or the client code.
Remember that such data can also be entered afterwards on to the print-out by using the
PROCOD
and
CLIENT
shortcut keys. In this case however, the information is not memorised together with the
code and is valid only for a single operation.
The recognition code used during these procedures can be a data recall code (RPD of up to 4
figures) or the vehicle licence plate code (RPD Plate of up to 10 alphanumerical characters), decided
during the installation phase.
6.13.1 How to make the list of preset weights
As indicated previously, the preset weights can be associated with an RPD or RPD Plate code.
The list of preset weights is made in the following way.
Carry out the following operations:
press
RPD
(or
PPLATE
);
enter the desired code;
enter the weight to be memorised;
enter the product code;
enter the client code;
press
ESC
to quit;
repeat the procedure to enter a new code.
If the product code or client code is not required, press
ESC
after confirming the weight.
Содержание PS440 Series
Страница 2: ......
Страница 15: ...15 DS440IS Weight 4 kg The dimensions are given in mm Figure 1 2 Dimensions and weight of table top version ...
Страница 105: ...105 DS440IS ...
Страница 109: ...109 DS440IS ...