Bil-Jax 45XA, Руководство оператора

Страница: 14 / 52

BILJAX 45XA
Inspect hydraulic system and fluid levels.

Check all hydraulic hoses and fittings for leaks and
damage. Tighten or replace as necessary to prevent
hydraulic oil or pressure loss.

The hydraulic oil level should be checked with the
booms down, all outriggers raised and the wheels on
a level surface.

Hydraulic oil level should be visible in, but not above,
the sight gauge.

If the hydraulic oil level is not visible to at least half
way up the sight gauge (Figure 2-2), add clean
hydraulic fluid as necessary while all booms and
outriggers are fully retracted and stowed. Pour slowly
to avoid creating air pockets in the reservoir. Do not
fill above sight gauge. Overfilling the hydraulic
reservoir may cause damage to hydraulic lines and
may result in equipment malfunction.
CAUTION
Do not mix hydraulic oils. Do not add any fluid to
the hydraulic system that is not expressly
recommended by the manufacturer. Adding
unauthorized fluids to the hydraulic system may
cause damage to equipment
12

The hydraulic reservoir is originally filled with Dexron
III/Mercon ATF with a viscosity rating of 175.

Manufacturer recommends a higher viscosity
hydraulic oil when operating equipment routinely in
extreme climates.
1. Filter Element
2. Fill Port
3.
Sight Gauge
Figure 2-2. Hydraulic Reservoir