Operating manual No.
057-2-6-0010-R0
Page 23
Version 2021
EN
7
Operation section
Before starting any maneuver, make sure that there are no other people in the immediate vicinity of
the machine.
IT IS STRICTLY FORBIDDEN TO PASS UNDER THE MOBILE WORKING PLATFORM
7.1
Operation controls
Figure 5 - detail of the press handling system
The manual hydraulic pump has the following controls or relevant parts:
Pumping lever (Pos. 1)
Speed adjustment lever (Pos. 2)
Pressure release knob (Pos. 3)
Tank cap (Pos. 4)
The cylinder descends by operating the lever Pos.1 with a repeated movement from top to bottom.
By positioning the speed adjustment lever in the farthest position from the operator, the pump will
send oil to the cylinder both during the descent and the ascent phase of the pumping lever. In this
way the stem comes out of the piston faster. By turning the speed adjustment lever to the closest
position from the operator, the pump will send oil during the descent phase of the pumping lever.
Therefore, the maximum pressure of the press can be reached.
To insert the stem into the cylinder, simply turn the knob Pos. 3 counterclockwise.
4
3
1
2
