Bike-Lift MA506-002 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 38

Bike-Lift MA506-002 Скачать руководство пользователя страница 30

Operating Manual Nr.

057-2-6-0014-R0

Page 30

Version 2021

EN

8.4.3

Cleaning of work areas

Keep the work area clear of any material which may hinder the operations of the employees.
Keep the surrounding areas clean; in particular from oil, grease,

etc.,

which can make the floor

slippery.
Use suitable vacuum cleaners and proper equipment.

8.5

Faults and remedies

The most common problems encountered during the work, the probable causes which
determine them and the possible remedies to be taken to eliminate them are listed below.

When implementing the suggested remedy, always follow the instructions described in the
Instructions to which the remedy refers.

Bike-Lift Europe s.r.l. will solve all the problems which cannot be eliminated by means of the
attached instructions.

The motor housing (Figure 13) which activates and moves the platform is placed at the base
of the piston.
The foot and air pumps are, on the other hand, external and for their maintenance refer to the
intended Manual.

Figure 11 – electric motor

Figure 10 – motore elettrico

«
...
28
29
30
31
32
...
»

Содержание MA506-002







































Отзывы:

Нет отзывов