Bike-Lift CU500-003, Руководство по эксплуатации и обслуживанию

Страница: 16 / 35

Operating Manual no. 057-2-6-0016-R0
Version 2020
P. 16
EN
During the use of the lift it is very important to pay the utmost attention to the ascent and descent
maneuvers. During the ascent/descent phase the operator is required to distance from the lift
according to the length allowed by the control panel cable.
The personnel who are not in charge of using the lift must not pass or stand in the operating area
of the motorcycle lifting platform.
The machine must always be operated by only one Operator.
Once the motorcycle is loaded on the lifting platform, place it in
a vise or use the
rear kickstand, then fasten it with straps to the appropriate openings and wheel lock.
GIVEN THE BEARING VALUE INDICATED ON THE PLATE:
Do not exceed the load capacity of the lift;
Use it only to lift objects;
Do not modify the lift;
The load must always remain firm and stable.
3.6 Pictograms
Danger of crushing hands with the lifting platform arms.
Load the vehicle only when the platform is completely lowered;
Before lifting it, make sure that nothing is supported by the ramp;
Do not lean the rear wheel of the vehicle on the ramp during and after lifting.