Copyright 2018 Big John Grills & Rotisseries
8
This unit ships 90% assembled and we make sure the instructions for the rest are easy to follow and
perform. Please follow the instructions below to ensure your grill is properly assembled for safe
operation. Please remember this is a commercial piece of equipment and therefore the materials used
to build it are of the best quality. Because of this, the grill weight is considerable and will require 2
people to un-package, assemble, and set-up the unit.
1. Your Country Club grill is shipped upside down for protection.
2. Unbox the unit and, while upside down, attach the wheels.
A. Attaching the 8” Wheels:
i. Adjust nut to have a 1/4” clearance between the wheel bearing and the nut
ii. Thread wheel assembly into lower threaded hole and lock nut against frame
B. Attaching the 4” Caster Wheels
i. Locate coupler on opposite side of cart.
ii. Screw threaded stem of caster into coupler
iii. Tighten using thin wrench of caster wrench purchased from Big John Grills
3. Remove all packing materials, tape, protective laser paper (can be white, gray, or clear in color) from
stainless, and plastic coverings.
4. Follow hood assembly instructions if applicable.
ASSEMBLY INSTRUCTIONS
