Copyright 2018 Big John Grills & Rotisseries
5
CONNECTING A FILLED 30 LB. CYLINDER
Remove the main cylinder plug.
Make sure that all gas valves on the grill are in the “OFF” position.
Thread the QCC Connector or POL Connection snugly into main cylinder.
ALWAYS check for leaks. Apply soapy water with a brush or spray bottle to areas where the QCC
(or POL) screw into tank, where the QCC (or POL) attach to regulator, where the hose screws into
the regulator, and where the hose screws into the appliance.
Open the cylinder valve and watch for bubbles.
If bubbles appear, tighten the connections further. If this does not remedy the problem, call your
propane dealer.
If the system is free of leaks, light the burners and proceed to cook.
In the event of a QCC failure, your grill will not light or stay lit, see page 15 for troubleshooting.
If you suspect any problems, have your grill and tank serviced by a qualified professional
.
PROPANE SAFETY - CYLINDER
Spray Soapy Water on All Propane
Connections between Cylinder Valve
and Unit to Test for Leaks
Cylinder Valve to
QCC Connection
Lime Green QCC
to Regulator
Connection
Hose to Regulator
Connection
Hose to Unit
Connection
