Big Joe CB33, Руководство пользователя, Страница: 5 / 170

BL-CB33-0115 - 03-01-2018 1-1
SECTION 1
DESCRIPTION
1-1. INTRODUCTION.
This publication describes the 24 volt CB33 lift truck
manufactured by Big Lift LLC. Included are operating
instructions, planned maintenance instructions, lubri-
cation procedures, corrective maintenance procedures
and a complete parts list with part location illustrations.
Users shall comply with all requirements indicated in
applicable OSHA standards and current edition of
A.N.S.I. B56.1 Part II. By following these requirements
and the recommendations contained in this manual,
you will receive many years of dependable service
from your CB33 lift truck.
1-2. GENERAL DESCRIPTION.
The self-propelled CB33 truck, Figure 1-2 , lifts and
transports payloads up to 3300 pounds on adjustable
forks.
The forward and reverse motion is controlled by either
of two thumb controlled levers mounted on the control
head. Stopping and turning is controlled by the control
arm. Lift, Lower and Tilt are controlled by pushbuttons
on the control head. The battery powered lift truck is
quiet and without exhaust fumes.
The reversible AC motor propels the lift truck in for-
ward or reverse direction throughout the available
speed range. The CB33 lift truck can be driven with
forks raised or lowered; however, the speed is
restricted when the platform is raised above a preset
limit.
On demand power steering makes the lift truck highly
maneuverable.
The model number will be found on the name plate
(
Figure 1-1 ) along with the serial number, lifting capac-
ity, and load center. Figure 1-2 shows the locations of
the truck’s main components and controls.
1-3. SAFETY FEATURES.
The CB33 is designed and engineered to provide max-
imum safety for operator and payload. Some of the
safety features incorporated into the design are:
• Dead-man brake to apply the brake and cut off drive
power when the control arm is released.
Figure 1-1 Name Plate
• Belly-button switch to reverse truck should the oper-
ator accidentally pin himself against a wall or
obstruction when backing up in slow speed.
• High speed limit switch to restrict speed when lift
carriage is raised above the preset limit.
• All control functions automatically return to “OFF”
when released.
• Externally accessible quick-disconnect battery plug
within operator's reach.
• Separately fused control circuits and power circuits.
• Readily accessible horn button.
• Lift carriage backrest to help stabilize the load.
• Handle to provide a firm hand hold for operator.
• Flow control valve regulates maximum lowering
speed within prescribed limits.
• Relief valve maintains hydraulic pressure within pre-
scribed limits.
• High visibility color scheme of truck provides visual
alert of truck’s presence.
• Battery Indicator.
R6209
COMPLIES WITH THE APPLICABLE REQUIRE- COMPLIES WITH THE APPLICABLE REQUIRE-
MENTS OF ANSI B56.1 AND OSHA STANDARDS MENTS OF ANSI B56.1 AND OSHA STANDARDS
BIG LIFT LLC BIG LIFT LLC
WISCONSIN DELLS, WISCONSIN 53965 WISCONSIN DELLS, WISCONSIN 53965
AUSTRALIAN PATENT NO. 537,987 AUSTRALIAN PATENT NO. 537,987
U.S. PATENT NO. 4,444,284 U.S. PATENT NO. 4,444,284
TRUCK
TYPE
MODEL NO. SERIAL NO.
VOLTAGE
BATTERY
TYPE TYPE
CERTIFIED
MAX CAP LB/ MAX CAP LB/ LOAD CTR IN/ LOAD CTR IN/ LIFT HGT IN/
LOAD CTR IN/ LOAD CTR IN/ LIFT HGT IN/ ALT CAP LB/
BATTERY MIN WT LB/ BATTERY MIN WT LB/ TRUCK WT LESS BATTERY LB/ TRUCK WT LESS BATTERY LB/
BATTERY MAX WT LB/ BATTERY MAX WT LB/ TRUCK WT WITH BATTERY LB/ TRUCK WT WITH BATTERY LB/
KG MM MM
MM MM KG
KG KG
KG KG