PARTS AND FEATURES
1. Main Power Unit
-contains powerful motor
2. Power Switch
-2 speed selector: 0 (OFF) -1-2
3. Safety Locking Bar
-locks the parts in place during assembly
4. Large capacity bowl
-temporarily collects juice/pulp prior to dispersing
into juice/pulp cup
5. Pulp Collector
-used to collect the pulp
6. Stainless Steel Blade/Filter
- filters juice through a mesh strainer
7. Lid with locking tabs
-for secure operation
8. Extra Large Feeder
-food ingredients are fed through the tube to be
processed; 3 inch feeder allows for whole fruit/vegetable juice extraction
9. Pusher
-used for pushing ingredients for higher juice extraction
10. Juice Pitcher (1L/1QT)
-used for collecting the extracted juice
7
8
1
2
3
4
5
7
6
8
9
10
ASSEMBLY
(Refer to p. 7 for Parts Identification)
ASSEMBLING YOUR JUICER:
Set the Main Base on a flat, stable surface.
Place Large Capacity bowl onto the Main Base,
so that the spout of the bowl is aligned with
the gap of the Main Base.
Place the Lid over the Large Capacity
Bowl, making sure it fits tightly.
Pull the Safety Locking Bar over the Lid so it fits into the grooves
on the cover. NOTE: This is a safety feature. The Juicer will not
operate unless the Locking Bar is locked in. Do not use the
Locking Bar as a handle for picking up the appliance.
Place the Stainless Steel Blade/Filter
inside the Large Capacity Bowl and
press it down firmly. Be careful as
some parts may be sharp.
1
3
2
4
