Big Backyard ORIANA A24656E, Инструкция по установке и эксплуатации

Страница: 31 / 40

Step 17: Roof Frame Assembly
OR12
OR11
OR14
OR10
S3
S3
Fig. 17.1
Fig. 17.2
4 x #8 x 2-1/2” Wood Screw
8 x #8 x 1-1/2” Wood Screw
1 x 1/4 x 1-1/2” Hex Bolt
(1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
1 x Roof Ridge 5/4 x 3 x 55”
2 x Tarp Front Back 1 x 4 x 55”
1 x Roof Support 5/4 x 3 x 33”
OR11
S3
Hardware Wood Parts
OR12
OR13
A: Square and attach (OR13) Roof Support to (OR14) Side Roof with 1 (H1) 1/4 x 1-1/2” Hex Bolts (with lock
washer, flat washer and t-nut) as shown in fig. 17.1.
B:
Attach (OR11) Roof Ridge flush to outside edge of (OR10) SW Mount and to (OR13) Roof Support with 4 (S3)
#8 x 2-1/2” Wood Screws as shown in fig. 17.1.
C: Pre-drill pilot holes for the screws using a 1/8” drill bit and then attach 1 (OR12) Tarp Front Back to each end
of each (OR14) Side Roof, making sure the pilot holes are centred on the end of (OR14) Side Roof, with 4 (S2) #8
x 1-1/2” Wood Screws per (OR12) Tarp Front Back. The top of (OR12) should be flush to the top of (OR14) Side
Roof. (fig. 17.1)
D:
At all 4 corners attach 1 Corner Brace using the hardware provided as shown in (fig.17.2 & 17.3).
Fig. 17.3
OR14
Corner Brace with hardware
Flush
OR13
S2
H1
H1
S2
Other Parts
4 x Corner Brace (with hardware)
OR12
x 4 per board
31