Big Backyard ORIANA A24656E, Инструкция по установке и эксплуатации

Страница: 21 / 40

Hex Bolt Assembly
Lock
Washer
T- Nut
Flat
Washer
He x
Bolt
OR10
Fig. 10.1
H2
OR14
H2
F17
F13
F13
1 x SW Mount 2 x 4 x 65-3/4”
1 x Side Roof 1 x 4 x 68”
OR10
Hardware
Wood Parts
2 x 1/4 x 2” Hex Bolt
(1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
3 x 5/16 x 4” Hex Bolt
(5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
H2
OR14 G4
Swing wall side
F14
Note: You may have to loosen
bolts in F14 and F17 prior to
attaching OR10 SW Mount.
G4
Step 10: Attach SW Mount and Side Roof
A: On the Swing Wall side of the assembly attach (OR14) Side Roof to both (F13) Posts with 2 (H2) 1/4 x 2” Hex
Bolts (with lock washer, flat washer and t-nut). Make sure to keep the bolts loose. (fig. 10.1)
B: Attach (OR10) SW Mount to (F17) End Floor, (F14) Wall Support and (OR14) Side Roof with 3 (G4) 5/16 x 4”
Hex Bolts (with lock washer, flat washer and t-nut) as shown in fig. 10.1.
C: Tighten both bolts in (OR14) Side Roof.
21
Note: Hole
left open
Note: Use
this hole
Note: Hole
left open