BIG ASS FANS BAFWorks 3.0, Руководство по установке

Страница: 75 / 84

BAFWORKS
®
INSTALLATION GUIDE
69
WWW.BIGASSSOLUTIONS.COM ©2013 DELTA T CORP. ALL RIGHTS RESERVED
BAFWORKS
®
INSTALLATION GUIDE
Using BAFWorks
®
(cont.)
Configuring louver and vent group settings
To adjust the settings for a group of louvers or vents in the BAFWorks system:
1. On the BAFWorks home screen, touch Ventilation .
2. Locate the louver or vent group you want to work with, and then touch the Detail Page button for the group. The group details page
appears (Figure 17).
3. Adjust the settings as necessary, and then touch Done . See Figure 17 below and the following page for details.
To start or stop a group of louvers or vents in the
BAFWorks
®
system:
1. On the BAFWorks home screen, touch Ventilation .
2. Touch the name of the louver or vent group you want to
work with.
3. At the bottom of the screen, touch Open Louvers ,
Close Louvers , Turn On Ventilation , or Turn Off
Ventilation (Figure 16).
Note: You can also lock or unlock the operational status of
the louvers/vents in the group by touching the lock/unlock
icons in the bottom right corner of the screen (Figure 16).
This setting requires administrator password entry.
Note: A vent group is shown on the right. For a louver
group, the open/close and lock/unlock settings are in the
same locations shown on the right.
Starting and stopping louver and vent groups
Figure 16–Starting, stopping, and locking/unlocking vent groups
A. Group Name. Touch here to edit the group name.
B. Group Power. Open or close all louvers in the group, or turn all vents in the group on or off.
C. Admin Lock. Lock or unlock the operational status of all louvers or vents in the group. This setting requires administrator password
entry.
D. Schedule.
Touch
Edit
to schedule open/close, start/stop, and automation events for the group. Touch
On/Off
to enable or disable
scheduled events. See the following page for more information on scheduling.
E. Group Status. Indicates the operational status of each louver or vent in the group. See the previous page for descriptions of each
status icon.
F. Temperature. Indicates the current indoor floor level temperature and the outdoor temperature as reported by the temperature
sensors in the system.
G. IntelliVent
®
. Touch Edit to configure ventilation automation settings. Touch On/Off to enable or disable automation. See page 48 for
more information on automation.
Figure 17–Louver/vent group details page
A
E
B
C
D
F
G