BIG ASS FANS 8'-24' Powerfoil X, Руководство по установке

Страница: 11 / 72

8’ - 24’ POWERFOIL® X
WWW.BIGASSFANS.COM ©2011 DELTA T CORP. DBA BIG ASS FAN CO. ALL RIGHTS RESERVED
5
WWW.BIGASSFANS.COM ©2011 DELTA T CORP. DBA BIG ASS FAN CO. ALL RIGHTS RESERVED
8’ - 24’ POWERFOIL® X
Hardware
Beam Clip Hardware
(4) 1/2-13 x 2” GR 8 Bolt
(8) 1/2” Flat Washer
(4) 1/2-13 Nylock Nut
Single Pivot Hardware
(2) 1/2-13 x 5” GR 8 Bolt
(4) 1/2” Flat Washer
(2) 1/2-13 Nylock Nut
Lower Yoke Hardware
(2) 1/2-13 x 5” GR 8 Bolt
(4) 1/2” Flat Washer
(2) 1/2-13 Nylock Nut
Motor Hub Hardware
(4) 1/2-13 x 1 3/4” GR 8 Bolt
(8) 1/2” Flat Washer
(4) 1/2-13 Nylock Nut
Winglet Hardware
(10) 10-24 x 1/2” Bolt
(10) 10-24 x 3/4” Barrel
Airfoil Hardware
(20) 5/16-18 x 2” GR 8 Bolt
(40) 5/16” Flat Washer
(20) 5/16-18 Nylock Nut
Hub Cover Hardware
1
(4) 8-32 x 3/8” Screw
(4) Gripple Hardware
2
(1) Locking Carabiner
(1) 1/4” Beam Clip
(1) 1/4-20 x 1” Eyebolt
(1) 1/4-20 Hex Nut
(1) Gripple™
(1) Guy Wire
(4) Wire Rope Clip
Parts Included
Note: Drawings below are not to scale.
Note: No hardware substitutions are acceptable.
1. The Hub Cover Hardware is packed in the hub cover box.
2. Guy wires are designed to constrain fan’s lateral movement
and are only included in some fan packages. Big Ass Fans
recommends using guy wires if the fan’s extension tube is 4 ft or
longer, if the fan is exposed to high winds, or if the fan is close
to any building fixtures. Gripple/Eyebolt hardware is bagged
separately from hardware boards.
3. Safety cable is attached to extension tube.
4. Shackle included on hardware boards.
Airfoils
(10) Airfoils
(10) Powerfoil®
Winglets
(10) Powerfoil®Plus
Winglets
(10) Airfoil Retainers
Mounting
(2) Beam Clip & (2)
Spacer
Upper Yoke (2) Lower Yoke
Motor & Hub Extension Tube, Safety Cable
3
, &
Shackle
4
Hub Cover
Hub Cover Center Cap
or
Pre-Installation