September 2021
Installation, Operation and Maintenance Manual
VCIOM-01249-EN Rev. 0
76
Set-Up Routines
Section 9: Set-Up Routines
9.3.6
Set Maintenance Date
The maintenance date routine allows the following operations:
•
to set the last maintenance date
•
to set the next maintenance date
•
to set the start-up date
Configuration procedure
•
Move the local selector to OFF and then simultaneously press OPEN and STOP.
Select the language and enter the password according to the instructions (see
“Entering the set-up mode”). When the message displayed is “SET-UP MODE OK?”
press YES. Press NO to scroll the list of available menus and then YES to select the
maintenance menu.
•
Press NO to scroll the list of available routines and press YES to select
maintenance date.
•
Press YES to set the last maintenance date. Press NO to skip to “next
maintenance date”.
Last maintenance date
•
Press YES if the date is correct, press NO to change it.
•
Enter day, month, and year. Press NO to scroll the list of available values, press YES
to select.
•
Press YES if the date is correct.
Next maintenance date
•
Press YES if the date is correct, press NO to change it.
•
Enter day, month, and year. Press NO to scroll the list of available values, press YES
to select.
•
Press YES if the date is correct.
Start-up date
•
Press YES if the date is correct, press NO to change it.
•
Enter day, month, and year. Press NO to scroll the list of available values, press YES
to select.
•
Press YES if the date is correct.
