background image

BP-LFP-2725(D)

Revision 1-2

5

B  Safety instructions

B1  General information

The safety instructions have to be read completely before the first use and carefully observed! 

In addition, the corresponding safety data sheet has to be observed

.

Incorrect operation or connection may result in serious injury or death. Due to incorrect opera-
tion, leaving the limit values or incorrect connection risk of fire or explosion exists. When working 
with the battery, care must be taken that no jewelry such as rings or watches are worn, which 
can cause a short circuit.

 

A Features

 

BP-LFP-2725(D)

  25.6 V DC / 2.5 Ah

 

10-year long-life battery for challenging

 applications

 

High reliability and energy density

 

Safe lithium-iron phosphate technology

 

100% free of lead and cadmium

 

Extended temperature range -20…+55 °C

 

High performance battery management system

 

Extended safety functions, charge algorithm

 and cell balancing

 

Integrated protection against deep discharge, 

  overcurrent, overvoltage, short circuit and

 overcharging

 

Compactly shrinked or as DIN-Rail version

Содержание BP-LFP-2725























Отзывы: