Bibby Sterilin Techne TECAL 700, Руководство оператора

Страница: 7 / 32

5
replacement cable
Should the mains lead need replacement, a cable of 1mm
2
of harmonized code H05VV-F connected to an
IEC320 plug should be used. If In douBT ConsuLT A QuALIfIEd ELECTrICIAn.
Working Conditions
The Tecal 700 calibrator is designed to operate under the following conditions:
• Indoor use
• Ambient temperature range +5°C to +40°C
• Altitude to 2000m
• Relative humidity not exceeding 95%
• Mains supply fluctuations not exceeding 10%
• Over voltage category II IEC 60364-4-443
• Pollution degree 2
• Environmental conditions should not be excessively dusty or dirty
Note: The control specifications are quoted at an ambient temperature of 20°C. The specification may
deteriorate outside an ambient temperature of 10°C to 30°C.
The instrument has been tested for radio frequency interference and is certified under EN61326.
guArAnTEE
The instrument is guaranteed against any defect in material or workmanship for the period specified on
the enclosed guarantee card. This period is effective from the date of purchase; within this period all
defective parts will be replaced free of charge provided that the defect is not the result of an accident,
misuse or negligence. The screen of the calibrator can be damaged by sharp objects such as pens, pencils
and fingernails. Damage of this sort will be considered misuse and will invalidate the guarantee for this
component.
Servicing under this guarantee should be obtained from the supplier of the instrument.
This manual has been prepared for the convenience of Techne customers and nothing in this manual shall
be taken as a warranty, condition or representation concerning the description, merchantability, fitness
for purpose or otherwise of the unit or components.
Notwithstanding the description and specification(s) of the instruments contained in the operator’s
manual, Techne reserves the right to make such changes as it sees fit to the instruments or to any of the
components.