Bibby Sterilin TECHNE Tecal 425S, Руководство оператора

Страница: 16 / 21

PAGE 14
T E C A L 4 2 5 S O P E R A T O R ’ S M A N U A L
RS232 SERIAL INTERFACE
The calibrator may send data logging information to an IBM PC or
compatible computer by connecting the unit and the PC via an RS232 cable,
and installing the "Calsoft" software. Contact your supplier for details.
Ensure that there is a connection made before the calibrator is
switched on.
The RS232 cable must be fitted to both the unit and the PC before either unit
is powered up, otherwise, data integrity cannot be guaranteed. Once the
cable is fitted, it does not matter which unit is powered up first.
RS232 9-way PC serial port
ON/OFF switch
Fuses Power inlet
The following tables indicate the cable specifications for a 9-way PC serial
port:
Calibrator PC
9-way female D type 9-way female D type
pin signal pin
Case F.GND Case
3 TxD 3
2 RxD 2
7 RTS 7
8 CTS 8
6 DSR 6
1 CD 1
4 DTR 4
5 S.GND 5
Sending data to the PC
The procedure for sending data to the PC is described in the instructions
supplied with the software. The PC must be properly connected by the
RS232 cable and running Calsoft to accept or display data.