Bibby Sterilin Techne 3Prime, Руководство оператора

Страница: 44 / 56

run
Touching the Run button sends the selected program to the
3
Prime, ready to start the run.
42
the Pre-run screen
This screen shows a step-by step representation of the
program in a tile format. The program name is given at the
top of the screen followed by the stage name.
The first step tile is highlighted and enlarged in the centre of
the screen.
●
Touch the
arrows
to scroll forwards and backwards
through the program, or drag a finger across the screen.
The step tiles show the set incubation temperature. The white
bar underneath shows the stage number and number of
cycles within the stage.
The bottom of the screen shows the expected end time if the
program was started immediately.
●
Touch start to start the program.
●
Touch
edit
to edit the program.
●
Touch Back to return to the previous screen.
the run screen
Once the program has been started, the current step is shown
by the central highlighted step tile. The tile shows the set
temperature, the incubation time and the status i.e. ramping
to temperature, paused or the count down time of the step.
The white bar underneath shows the current cycle number
within the stage.
Timers at the bottom of the screen indicate how long the
program has been running and give an estimate of the total
run time to completion. Total run time is recalculated
throughout the run.
●
Touch stop to stop the program. A prompt will ask you to
confirm the stop. Touch Yes to confirm or cancel to
continue with the run.
●
Touch
Pause
to pause the program. If paused, touch
continue
to un-pause the program.
●
At the end of a run, if the program is in a final hold, touch
Finish to end the program.