Bibby Sterilin Techne 3Prime, Руководство оператора

Страница: 26 / 56

advanced temperature entry
●
First ensure the number of cycles for the stage has been set
then enter the required hold temperature as described
above.
note : Increments and Decrements will be inactive unless
the number of cycles set is greater than 1.
to increase or decrease the step temperature per cycle:
●
Touch the step temp button. This will open the
temperature screen as shown opposite.
●
Touch Increments and Decrements .
The increment, decrement and gradient (
3
PrimeG only) screen
will open.
●
Touch the button next to the required parameter to turn it
on .
●
Next touch the temperature button to set the increment
or decrement per cycle.
A new screen will open which is similar to the simple
temperature entry screen.
●
Enter the required value followed by Back .
●
If an entered temperature value is invalid, a prompt will
indicate the acceptable range.
●
Touch accept to return to the previous screen.
●
Touch ok to accept the modification and return to the
program.
●
Touch cancel to return to the programming screen if no
changes are required.
24