Bibby Sterilin Techne 3Prime, Руководство оператора

Страница: 34 / 56

restore Factory settings
All changes to the instrument defaults and settings can be
removed and the unit returned to its factory settings.
●
From the Administrator menu touch restore Factory
settings .
●
Touch the none button and enter the administrator
password followed by Back .
●
Touch restore settings and the unit will be reset to
factory defaults.
●
Touch cancel to return to the Administrator menu
without making any changes.
●
Touch Back to return to the Settings menu.
Heated lid
Use this to set the heated lid temperature to approximately
10ºC higher than the hottest block temperature in the
program.
●
Touch on/off to toggle between settings.
●
Touch the temperature button to set the required lid
temperature (35 to 115ºC).
Preheat lid
Set to On to pre-heat the lid before the thermal cycling
program begins. The lid will pre-heat for 2 minutes before
the program starts.
●
Touch on/off to toggle between settings.
sample cooling
Set to On to cool the block to 4ºC while the lid preheats.
●
Touch on/off to toggle between settings.
●
Touch more settings for further program defaults or
Back to return to the Settings menu.
32
ProGram DeFaults
The program default settings will apply to every new program created on the 3 Prime. However individual
programs can be edited as required.