Bibby Sterilin stuart SM5, Инструкция по эксплуатации

Страница: 3 / 20

3
2. Insert the power supply 12 Volt plug into the
base socket of the MiniStirrer.
3. Select the correct plug attachment and attach
to the power supply unit as shown below. Plug
the power supply plug into the mains supply
socket.
4. Place a loaded beaker containing a magnetic
stir bar on the MiniStirrer platform.
12 volt
5. Rotate the control knob clockwise to adjust
the stirrer speed between 350-2000rpm.
Maintenance & Servicing
The MiniStirrer
is not
serviceable. Routine
maintenance should include inspection of the
power supply unit cord and stirrer base for
damage. Periodically clean the instrument using a
dry cloth.
For any technical enquiries regarding this product,
please contact the Technical Support Department:
E-mail: stuarthelp@bibby-scientific.com
Tel: +44 (0)1785 810433
Warranty
Stuart warrants this equipment to be free from
defects in material and workmanship, when used
under normal laboratory conditions, for a period
of
three (3)
years. In the event of a justified
claim, Stuart will replace any defective
component or replace the unit free of charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused by
installation, adaptation, modification, fitting of
non-approved parts or repair by unauthorised
personnel.
Bibby Scientific Ltd.
Beacon Road, Stone, Staffordshire
ST15 0SA
United Kingdom
Tel: +44 (0) 1785 812121
Fax: +44 (0) 1785 813748
E-mail: equipment@bibby-scientific.com
www.stuart-equipment.com
+