5
E. Connecting and using background music
1.
Connect a 40 Watt (or less) load to the 70 Volt output or an 8 ohm load to the 8 ohm output. Only one
can be used at a time. Don’t attempt to use the 70 Volts and 8 Ohm outputs simultaneously.
2. Turn all front panel controls to “0”. (The bass & treble controls will be at mid range)
3.
Connect the DS1092 to a nominal 120 Volt 50-60 Hz source.
4. Connect the unbalanced output from your CD player, tuner, etc. to the Aux input on the DS1092 rear
panel.
5. The green power LED should be lit at this time.
6. Turn on the CD player, etc. and slowly increase the music control for the desired level and set the bass
and treble controls appropriately.
Содержание Dynasound PRO DS1092
Страница 1: ...DS1092 Soundmasking Paging System...
Страница 2: ......
