16
10. ADJUSTING THE
HANDLEBAR TUBE
HORIZONTALLY.-
1)
Loosen lever (79), located on the
vertical tube on the main body (1),
Fig.9, by turning it anticlockwise.
2)
Slide the handlebar stem (2)
backwards or forwards to the required
position and then retighten the lever
(79) by turning it clockwise, Fig.9.
ATTENTION:
It is important to retighten all of the
screws involved in assembling the
machine after approximately a week of
use as this will prevent any strange
noises and possible damage.
LEVELLING.-
Once the unit has been placed into its
fi nal position, make sure that it sits fl
at on the floor and that it is level. This
can be achieved by screwing the
adjustable feet (87) up or down, as
shown in Fig.10.
MOVEMENT & STORAGE.-
The unit is equipped with wheels (59)
to make it easier to move. The wheels
located at the front of your unit make it
easier to move it into a chosen
position, by lifting the rear of the unit
up slightly and pushing it, as shown in
Fig.11. Store your unit in a dry place,
preferably not subject to changes in
temperature.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
Do not hesitate to get touch with us if
you have any queries, by calling:
+44 0844 335 3988
Содержание G290
Страница 2: ...2 Fig 1 Fig 2 Fig 3 ...
Страница 3: ...3 Fig 4 Fig 5 Fig 5A Fig 6 Fig 7 ...
Страница 4: ...4 Fig 8 Fig 9 Fig 10 Fig 11 ...
Страница 54: ...54 G290 ...
