T10 Treadmill
BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610
www.bhfitness.com • Phone 949-206-8152 • Fax 949-206-0013
7
1. As required, use the fishing line inside
of uprights (D, E) to bring wire up from
Frame throught upright to the top of
upright.
2. One assembler hold the upright.
3. Second assembler tighten the left and
right uprights (D, E) on the frame with
screws (a). Be careful not to damage
wires.
4. Install Decoration Covers (F, G) and
fasten with Screws (C).
5. Pass
wire
from
Upright
into
Handle/Holder Set (C) through cup
holder space to the rear of (C). See
small figure.
6. Fasten Handle/Holder Set (C) onto
uprights (D, E) with Nylon Nut (b).
7. Verify wire appears at the rear of (C).
See small figure.
Bring wire to rear
of Holder (C)
