T10 Treadmill
BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610
www.bhfitness.com • Phone 949-206-8152 • Fax 949-206-0013
21
CONSOLE OPERATION CONTINUED
INSTANT SPEED/INCLINATION BUTTONS – You can change the speed or inclination of the
treadmill by pressing one of the Instant buttons. Each button represents the assigned value in
either Miles Per Hour (MPH) or percent grade.
NOTE:
Additional information about Incline:
1. When the safety key is removed and put back, whatever the current position of incline, it will
not return automatically to zero. The user must press the START or STOP button to return the
incline to zero.
2. When the user turns off power and then turns it back on, whatever the current position of
incline, it will not return automatically to zero. The user must press the Start key to return the
incline to zero.
3. During a program, if you press the Stop to PAUSE, then the incline will return to zero.
FAN – Press this key to blow air from the vent located at the top center.
LOWER CONTROLS:
QUICKSTART – This key is used to begin any treadmill program or QUICKSTART.
STOP – This key is used to stop the treadmill at any time. Press STOP/RESET once to stop
the running belt. Press STOP a second time and hold for 3 to 5 seconds until it beeps
to end the program and set the incline to zero from an elevated position.
This key is used to adjust the speed of the treadmill.
This key is used to adjust the inclination of the treadmill.
TO STOP
1. Slow sped, step off running belt onto the side rails.
2. Press STOP. The running belt will stop. This key is used to stop the treadmill at any time.
Press STOP/RESET once to stop the running belt. Press STOP a second time and hold for 3
to 5 seconds until it beeps to end the program and set the incline to zero from an elevated
position.
NOTE: To stop immediately, pull out the safety key from the safety key recess and the treadmill
will stop abruptly.
