21
This message will disappear after the failure is corrected.
1-5 H.R.C. Mode
User may preset different target heart rate from 55%, 75%, 90% and Target by pressing
UP and DOWN button. Press MODE to confirm.
TIME : when blinking, you may press UP or DOWN button to set up target training time
from 00:00 to 99:00. Press MODE to confirm setting.
DISTANCE : when blinking, you may press UP or DOWN button to set up target distance
from 0.00~99.59.
Press MODE to confirm setting.
CALORIES: when blinking, you may press UP or DOWN button to set up target calories
from 0~9990.
Press MODE to confirm setting.
Press START button to start training:
The resistance level will adjust accordingly to the user’s current heart rate reading as preset.
If the heart rate reading is lower than target, the resistance level will increase one level
On the contrary, the resistance level will decrease one level every15 seconds until reaching
level 1. At this level, if user’s hear rate still exceeds target for more than 30 seconds,
will stop and start bi-bi-bi-bi-bi-bi to warn user.
the program
NOTE:
1. The
monitor will shut off if the training is stopped or none of the buttons is
display
pressed for 90 seconds.
2. Error message:
E2
When the monitor displays this information, the control board connection failed.
PULSE :
the monitor will detect user’s heart rate. Please hold on to the handgrip sensor or
wear chest belt when start exercise.
every 30 seconds automatically
CONSOLE (cont’d)
20155 Ellipse, Foothill Ranch, CA 92610
Phone: 949-206-0330, 866-325-2339 (USA & Canada)
HS8 HYBRID CYCLE
Содержание HS8 -
Страница 20: ...19...
