18
DISTANCE
Count up – no preset target, distance will count down from 0.00 to 99.50.
Countdown – with preset target, distance will count up from preset to 0.
PULSE
The monitor will detect heart rate, when user hold on to handgrip sensors
and wears chest belt at the same time, the handgrip takes priority.
When the monitor cannot detect pulse signal, it will display “P”.
OPERATING INSTRUCTIONS
Power On
Programs with its corresponding LED will illuminate,
user may press UP or DOWN key
to
select
preferred program (MANUAL
PROGRAM
USER
HRC
WATT).
Training Modes
1. Training mode selection:
1-1 Manual Mode
User may preset their own resistance level from1 to 16 by pressing UP/DOWN button.
The default resistance level is the lowest. The press mode to confirm setting.
TIME: when blinking, you may press UP or DOWN button to setup target training time from
00:00 to 99:00.
Press MODE to confirm setting.
DISTANCE: when blinking, you may press UP or DOWN button to set up target distance
from 0.00~99.59.
Press MODE to confirm setting.
CALORIES : when blinking, you may press UP or DOWN button to set up target calories
from 0~9990.
Press MODE to confirm setting.
PULSE : the monitor will detect user’s heart rate.
Please hold on to handgrip sensors or
wear chest belt when start exercise.
1-2 Program Mode
There are 12 program profiles (P1~P12) for training selection.
User may press program
buttons from P1 to P12 to select profiles in stop mode.
Or press UP or DOWN button to select each profiles you want and press MODE to
confirm.
Then you may press UP or DOWN button to adjust the resistance level from 1 to 16
CONSOLE (cont’d)
Start pedaling above 15RPM, the monitor will display all segments with a long beep for
2 seconds.
20155 Ellipse, Foothill Ranch, CA 92610
Phone: 949-206-0330, 866-325-2339 (USA & Canada)
HS8 HYBRID CYCLE
Press START button to start training:
The first segment starts blinking and switches to the next segment according to the preset time
which is divided into 16 equal segments. Once the preset target data counting down to 0
the program stops
You may press START button to start training again.
automatically.
Other preset data will keep counting down from previous data.
TIME: when blinking, you may press UP or DOWN button to setup target training time from
00:00 to 99:00.
Press MODE to confirm setting.
DISTANCE : when blinking, you may press UP or DOWN button to set up target distance
from 0.00~99.59.
Press MODE to confirm setting.
CALORIES : when blinking, you may press UP or DOWN button to set up target calories
from 0~9990.
Press MODE to confirm setting.
PULSE : the monitor will detect user’s heart rate.
Please hold on to the handgrip sensors or
wear chest belt when start exercise.
Press START button to start training:
The first LED segment starts blinking and switches to the next segment according to preset time
which is divided into 16 equal segments. Once the preset target data counting down to 0, the
program stops automatically. You may press START button to start training again. Other
preset data will keep counting down from previous data.
Содержание HS8 -
Страница 20: ...19...
