BGU FSW 5.5 H Evolution, Оригинальное руководство пользователя

Страница: 8 / 32

8
• Do not stand in the dangerous area. Assure that nobody stands
inbetween winch and tractor, unless the tractor is safely braked and
blocks have been put underneath the wheels to avoid accidental
moving.
• Do not remove nor start handling timber before the winch has come
to a complete stop.
• Periodically check that all screws and fixations are tightly in place.
• Before putting the winch to work perform a visual checkup of the
overall conditions and let a skilled technicial overhaul and service
your winch at least once a year.
• It is strictly prohibited to use the winch for any other application
than mentioned in this manual. CAUTION: do not use the winch for
hoisting applications! (Figure 5)
• Make sure that power is fully disconnected from the winch and that
the tractor has been switched off before performing any repair or
work on the winch.
• Never operate the winch without its safeties and protections duly in place.
• Strictly use wire rope of adequate crush resistance, strength and
quality. Provide for immediate wore rope replacement, if any fault
or anomaly is detected.
• Be sure that your wire rope length provides for a free gap to the up
per drum profile of least 1.5 the rope diameter when fully spooled.
In other words, when the rope is fully spooled there should be
space left on the drum for at least two more coils.
• Make sure that your helpers do not put any extra load on the winch
without prior informing the tractor driver.
• Strictly operate the winch from a safe place, at safety distance from
the load, the rope and such other dangers as unfelled trees. The
driver seat accounts as a safe place only if a safety screen is provi
ded to separate the winch from the tractor in such a way that it may
not be removed or bypassed.
The work site and the area around the logging winch must be kept
free from hinders and obstacles. Make sure that all access ways are
properly maintained so that timber can be safely skid, loaded and
shipped.
3.1 Mandatory application field
Our logging winches are designed and conceived for farming and tim-
ber skidding applications. Any other use shall be considered non-com-
pliant application. The manufacturer accepts no responsibility for da-
mages caused by non-compliant application. In this case the operati-
on of the machine is completely at user’s risk.
The user shall strictly comply with these operation , set-up, mainte-
nance, repair and trouble-shooting instructions in order to assure safe
operation and no damages to the equipment.