20
6.3 About hydraulic oil
Periodically check the oil level inside the hydraulic oil tank.
When doing so, accurately avoid contaminating the tank with
dirt, wood chips, sow dust etc... Make sure that the winch
never runs without oil or with a low oil level. When this hap-
pens, air is likely to reach inside the hydraulic loop. Failure to
maintain due oil level may cause poor running and irregular
operation (very rough, jerky motions) as well as major pump
damages. Please schedule your first oil change after approxi-
mately 200 operation hours, the second one after each 600
operation hours and the following one after every 1000 opera-
tion hours or at least once a year.
Recommended hydraulic oils are:
Mobil DTE 16, Shell Tellus T 46, Castrol Hyspin AVH 46
Make sure to check the oil temperature every once in while
during operation. Should the temperature exceed 70°C, stop
working, disconnect power, search and fix the cause for over-
heating before continuing to work. DANGER: excess heat over
a prolonged period of time may lead to even permanent dama-
ges of the hydraulic circuit.
When changing the oil, never let used oil drop down on the
ground, rather collect whole of it in a sealed container for due
disposal. Oil disposal containers should be of at least 7 l ca-
pacity. If you are using smaller containers, make sure to drain
the tank in more than one round to avoid spilling old oil out on
the ground.
Used oil is very polluting and should be disposed in accordance
with local provisions!
6.4 Consumables
• Brake collar (Code No. 901532)
• Sprocket assembly m. clutch (Code No. 901531)
6.5 Accessories
On the machine is a hydraulic rope ejector with inlet brake equipped
in standard.
Содержание FSW 5.5 H Evolution
Страница 27: ...27 14 FSW 5 5 H EXPLODED VIEW...
