BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Page 5
2.4.3
RISK OF FIRE
DO NOT OPERATE THE EQUIPMENT IN ENVIRONMENTS WITH AN EXPLOSION
HAZARD!
Do not heat aerosol or other cans, metal containers, and any pressure vessel used for
the storage of fuel, compressed gases and liquids. The heat generated by heating DHI-
15 may cause them to explode and their contents may ignite.
Do not use the heating spiral (coil), if the insulation is damaged. A defect in the
insulation may cause sparks in contact with metal objects or between the turns of the
coil. In particular, when working on / or near gas pipes and / or gas tanks it may pose a
danger of explosion or fire. Using coils with damaged insulation will void the warranty.
2.5
SYMBOLS WARNING WHILE HANDLING THE DEVICE
2.5.1
SAFETY EQUIPMENT WHEN WORKING WITH THE DEVICE
Always wear protective goggles or face mask when using the BGS 3390.
Use of the device may produce dangerous waste gases from burning of old paints,
lubricants, sealants, glues, etc. These exhausts may be toxic. Always use adequate
protective masks or respirators.
Always use protective gloves with adequate thermal resistance when working with the
device. The high temperatures produced by using the BGS 3390 may cause serious
burns on contact with the heated part.
Persons with pacemakers or other metal or electronic surgical implants must not
operate with the device BGS 3390 and must keep a safe distance of at least 1m from
the device.
When working with the BGS 3390, do not wear any metal objects such as jewelry,
rings, watches, chains, identification tags, belt buckles, piercings, or clothing with metal
parts such as metal rivets, buttons and zippers, etc.
The device can heat up these metal objects very quickly and cause serious burns or
even ignition of clothing.
