BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Page 3
1
INTRODUCTION
Dear Customer, thank you for your trust and Purchase of product from BGS technic KG. We believe
that you will be fully satisfied with our product and that you will keep your favor in the future as well. In
case of any questions or comments do not hesistate to Contact us either on our website or Contact
your sales representative directly. The first use of the device is the purpose of this legal step
instructions, which the user confirms their free will, that this instruction properly studied, fully
understand its meaning and familiar with all the risks.
ATTENTION! Do not attempt to place (or use) the Equipment before you become familiar the entire
operating instructions. Keep the instructions for future use.
2
SAFETY INSTRUCTIONS
2.1
GENERAL INFORMATION WHILE HANDLING THE DEVICE
This device generates alternating current of high frequency. The current passing through a heating
coil creates an alternating magnetic field which by using the principle of electromagnetic induction
vibrates electrons inside the heated material. The energy of moving electrons is dissipated as heat,
which heats the metal in the work field of the instrument. The more easily magnetisable material, the
more heat it creates. That is why the device heats easily nonferrous metals and their alloys, but has
no effect on glass, plastics, wood, textiles and other non-conductive materials.
Users are responsible for installing and using the system in accordance with the instructions provided
in this manual. The contractor shall not be liable for damages resulting from improper use and
handling.
The device may be operated only by persons properly trained and appropriately qualified. Do not
operate BGS 3390 under the influence of drugs, alcohol or medication
Bystanders and animals should be kept safely away when operating with the device, even when
cooling the heated material.
Avoid working in the rain, water and moist environments. Keep work area well ventilated and dry,
clean and well lit.
When working with the device BGS 3390 always have a fully functional fire extinguisher within reach.
SYMBOL
EXPLANATION
IMPORTANT! Read carefully all instructions in the manual. Failure to follow these
instructions may result in electric shock or burns, fire and / or serious personal injury.
NOTICE: This equipment is not designed for use in residential environments and may not provide
adequate protection of radio reception in such environments
2.2
SAFETY RULES FOR PERSONAL PROTECTION
Do not leave BGS 3390 uncontrolled when it is started. Always use the main switch to turn BGS 3390
off if it is not used for heating!
Make sure that the power supply unit and the handle has an adequate supply of air for cooling. Make
sure the vents are clean and free of dust and dirt not to impede the flow of cooling air.
Do not attempt to repair BGS 3390. The device does not contain any user-serviceable components,
except for replaceable heating coils.
Before connecting BGS 3390 to the wall outlet make sure the outlet voltage corresponds to the
voltage on the rating plate. If the wall outlet voltage does not match the voltage indicated on the rating
plate, it may result in a serious risk of damage to BGS 3390.
Do not exceed the operating cycle BGS 3390 – 2 minutes heating (on) a 2 minutes cooling (off). The
main equipment is protected against device overheating, but heating coils are not, which may cause
their damage.
When using equipment with a spare power supply (Generators, converters and island systems) - eg
with a mobile generator it is necessary to use a quality spare source with sufficient power and with
quality AVR regulation.
The device must be protected from rain and moisture, mechanical damage and possible ventilation of
neighboring machines, excessive overloading and rough handling!
