To ensure that the release of fibres from these R.C.F (Refractory Ceramic
Fibre) articles is kept to a minimum, during installation and servicing we
recommend that you use a HEPA filtered vacuum to remove any dust
accumulated in and around the appliance before and after working on the
appliance. When replacing these articles we recommend that the replaced
items are not broken up, but are sealed within heavy duty polythene bags,
clearly labelled as “RCF waste”. RCF waste is classed as a “stable”, non
reactive hazardous waste and may be disposed of at a landfill licensed to
accept such waste Protective clothing is not required when handling these
articles, but we recommend you follow the normal hygiene rules of not
smoking, eating or drinking in the work area, and always wash your hands
before eating or drinking.
3.2
LIGHTING THE APPLIANCE
a)
Turn on the gas isolation tap.
b)
Depress the control knob and turn anti-clockwise to the position
marked ignition / low rate. Hold in the control knob for a few seconds to
purge the pipe work.
c)
Continue to hold-in the control knob and press the igniter button. If the
burner does not light, continue to press the igniter button until ignition
occurs. Continue to hold the control knob for a minimum of 10-15
seconds to allow the thermocouple to heat up, if the burner goes out
when the control knob is released, repeat the lighting sequence.
Note
:
The burner system on this product has an integral pilot assembly. The
pilot system is part of the burner and is not a seperate component.
d)
Turn the control knob in the anti-clockwise direction to the high position
and the gas rate will increase to high rate (6.9 kW)
e)
Turn the control knob clockwise to the low position and the gas input
will be reduced to the minimum setting (2.5 kW)
f)
Slightly depress the control knob and turn to the off position, the burner
will now be extinguished.
WARNING : If the fire goes out for any reason or is turned off and it
is necessary to re-light the fire it is important to allow the
fire to cool for 3 minutes before attempting to re-light it.
16
