5.3.7
To Set the Time on the Remote Handset
5.3.7.1
Simultanelously press the “UP” (large flame) arrow and “DOWN” (small
flame) arrow buttons on the remote handset.
5.3.7.2
Press the “UP” (large flame) arrow to set the hour and the “DOWN”
(small flame) arrow to set the minutes.
5.3.8
To Set the oC / 24 Hour or oF / 12 Hour Clock
5.3.8.1
Press and hold the “OFF” and the “DOWN” (small flame) arrow buttons
on the handset simultaneously until the display changes from oC to oF
and vice versa
5.4
CLEANING - WARNING
Before attempting any cleaning operation ensure that the fire has been allowed to
fully cool.
5.4.1
Cleaning the Painted Parts
The painted parts should only be cleaned using a clean, damp cloth.
Abrasive
cleaners, chemical cleaning agents or any type of polish must never be used
as damage to the finish may result.
5.4.2
Cleaning the Fuel-bed
We do not recommend cleaning of logs or fuelbed components as these are
fragile and damage may result.
None of these parts must be washed or
exposed to any cleaning agents or water
. Any damaged parts must be
replaced by contacting your dealer or telephoning BFM Europe on the number
stated on the rear cover of this book. Logs or bark chippings must only be
replaced with a complete and genuine replacement set and the fire must never be
run with the wrong number or damaged logs or bark chippings The fuelbed must
be carefully re-assembled as stated in section 5.4
5.4.3
Cleaning the Glass Panel
To clean the glass panel, please remove it from the product as described below
and overpage in section 5.4.4 Use a clean damp cloth and ceramic glass cleaner
to remove any stains or deposits from the glass panel. Do not using scouring
pads as this may scratch the surface finish of the glass panel.
PLEASE NOTE
:- The glass will require cleaning periodically. Condensation
produced by the products of combustion will create marks on the inside face of the
glass panel.
58