FV6020 User Manual
- 35 -
Configure permit/deny private server register
；
Configure enable/disable private outbound proxy
；
if you have no stun server .advise
to enable the option.
Note: about how to use SIP ,Please refer to the Dial peer chapter.
6.7.7 Digital map configuration
6.7.7.1 Fixed digital map
End With
“
#
”
: Use # as the end of dialing.
Fixed Length: When the length of the dialing match, the call will be sent.
Timeout:
Specify the timeout of the last dial digit. The call will be sent after
timeout
6.7.7.2 User define flexible Digital map table
Digit map is a set of rules to determine when the user has finished dialing. Digital Map
is based on some rules to judge when user end their dialing and send the number to the
server.With digital map, users don
’
t have to press
‘
#
’
key or "call"key after dialing. If
the number dialed matches some item in the digital map table, or it doesn
’
t match
with any item, this number will be sent out immediately. It is not like using dial peer .
Using digital map won
’
t change the number dialed, the number sent is the same as the
number dialed.
X represents any one number between 0 and 9.
Tn represents the last digit timeout. here [ n ] represents the time from 0~9 second, it
is necessary. Tn must be the last two digit in the entry. If Tn is not included in the
entry, we use T0 as default, it means system will sent the number immediately if the
number matches the entry.
. (Dot) represents any number and no length limit.
[ ] number location value range . It can be a number range(such as [1-4]), or number
is separated by comma such as [1,3,5],, or use a list such as [234]
Example:
[1-8]xxx any 4 digits number between 1000 and 8999 sending out immediately
9xxxxxxx any 8 digits number starting with 9 sending out immediately
911 after finishing dialing 911 ,it will send out immediately
99T4 after finishing dial 911, it will send out in 4 second
9911x.T4 any more than 5 digits length starting with 9911, sending out in 4 second .