FV6020 User Manual
- 27 -
Definition of each parameter described as below
SIP[Unregistered]
Configuration
SIP register state
；
if register successfully, show
“
Registered
”
in
the square bracket
，
otherwise show Unregistered
Register Server address
Set SIP register server IP address
Proxy Server addr
Set proxy server IP address
（
usually SIP will provide the same
configuration of proxy server and register server, if different(such as
different IP addresses), then each server's configuration should be
modified separately
）
Register Server Port
Set SIP register server signal port
Proxy Server Port
Set SIP proxy server signal port
Register Username
Set SIP register server account username
（
Usually it is the same with
the config port number
）
Proxy Username
Set the SIP proxy server account username
Register Password
Set password of SIP register server account
Proxy Password
Set password of SIP register account
Domain Realm
Enter the sip domain if any, otherwise FV6020 will use the proxy
server address as sip domain.
(Usually it is same with registered
server and proxy server IP address).
Local SIP Port
Set local signal port
，
the default is 5060
Phone Number
Set assigned phone number
Register Expire Time
Set expire time of SIP server register, default is 120 seconds
Detect Interval Time
Set detection interval time of server, default is 120 seconds
RFC Protocol Edition
Enable the phone to use protocol edition. When the phone need to
communicate with phones using SIP1.0 such as CISCO5300 and so
on, need to modify into RFC2543. the default is to RFC3261
；
DTMF Mode
Set DTMF sending mode,
support RFC2833, DTMF_RELAY (inband
audio) and SIP info
User Agent
Set the user agent if have, default is common