FV6020 User Manual
- 16 -
Configuration Example:
Set IP address of Phone WAN port to 192.168.1.70 and lan port to 192.168.20.1
Note:
IP Phone must config the correct WAN port IP address and Gateway IP address
before connecting to internet. Due to FV6020 Phone Default mode is
router ,(brideg mode is disable ) so the WAN port IP could not be set to the same
segment with LAN Port IP address when you modify WAN Port IP. Otherwise
the,FV6020 can not get into internet. but if you had set wan port and lan port to
same ip segment , you need to set fv6020 to factory default.
Process:
power off ,and press # ,then power on ,input *#168
, and restart the fv6020
Default factory setting of WAN configuration is DHCP Client model
Default LAN Port IP=192.168.10.1 (Users could get them by pressing SYSINFO
Key)
Network
LAN
IP
IP
192.168.10.1
Input Value:
Input Value:
192.168.20.1
IP
192.168.20.1
6.Input
192.168.20.1
7.ENTER
Key
8.Press EXIT
twice
LAN
WAN
Static net
9.UP/DOWN
10.ENTER
11.ENTER
IP
IP
192.168.1.179
12.ENTER
MENU
1.INPUT
“
123
”
+
ENTER Key
Input Value:
Input Value:
192.168.1.70
IP
192.168.1.70
13.DEL
Key
15.ENTER
14.Input
192.168.1.70
4. ENTER
Key
3. ENTER
Key
2. ENTER
Key
5.DEL
Key