FV6020 User Manual
- 28 -
Enable Register
Configure enable/disable register
Auto Detct Server
Co-work with Server Auto Swap and Detect Interval Time. Enable
this option, FV6020 will periodically detect whether the public SIP
server is available, if the server is unavailable, the FV6020 will
switch to the back-up SIP sever, and continue detecting the public sip
server. FV6020 will switch back to the primary SIP server if the
server is available again.
Enable Pub Outbound
Proxy
Configure to enable to use public outbound proxy
，
if you have no stun
server , advise to enable the option
Server Auto Swap
Configure main and backup auto-swap server
；
if the phone enables
main and backup server function
，
the automatic detection and
auto-swap functions should both be chosen
SIP (Default Protocol)
Set SIP as the default signaling protocol
After finished the aforesaid network and VoIP configurations on the phone and network
communication has been implemented
，
the user can make VoIP calls by the calling register and
proxy server.
Note:
Some ISP internet may inhibit the phone to register and cancel the register in
process, so user had better cancel apply or register soon and then submit registration
repeatedly. Server may stop response of dialogue machine, then the phone receives
no register/cancel login request and registration state will show incorrectness!
Configuration Example
Firstly users should get the account info from VOIP Operator (Including Server IP
address, port, username, password etc.) and follow below procedure.
l
Config registered server and proxy server IP address and signaling port.
(Support DNS for registered server and proxy server)
l
Config the username and password for registered server and proxy server.
l
Config the phone number (Usually phone number is same with SIP account)
Remark: due to the above register username is
“
client
”
, so the phone number is
different from SIP account)
l
Config the domain realm (Usually it is same with registered server and proxy server
