13
The pushing
ram cannot
be pulled out
The portion of the pushing ram that
enters the interior of the heating
chamber is fixed by the cooling of the
gutta-percha.
1. Power on and set the
temperature to 200 °C. After the
temperature reaches the set value,
pull out the pushing ram back;
2. Contact your local dealer or our
company.
Charging
failure after
connecting to
power supply.
1. The power supply is not
correctly connected;
2. The power supply is
damaged, or the specification
doesn’t match.
3. There are impurities on the
contact thimble of charging
base.
1. Unplug and reconnect.
2. Replace the battery.
3. Wipe the thimble with alcohol,
dry it, and reconnect.
The service
time after
each
charging is
shortened.
The battery capacity becomes
smaller.
Send to the repair center.
ERROR code
appears
on display
screen
The heating chamber is damaged.
1. Send to the repair center.
2. Contact local distributor or
manufacturer.
If the problem still cannot be solved, please contact your local dealer or Beyes Dental Canada
Inc.
1. When the pushing ram is in the the GPro F1 gutta percha obturation gun, please do not
push or pull the pushing ram vigorously. When the gutta-percha is heated up to the preset
temperature, the pushing ram should be pushed by pulling the trigger for multiple times. If the
pushing ram does not move, try to push it manually with a slight force, and try to pull the trigger.
2. Please refer to the recommended temperature to set the preset temperature.
3. To remove all remaining material, please first remove the injection needle, and then pull the
trigger to squeeze out all the residual material in the heating chambers. Be careful not to touch
the head of the the GPro F1 gutta percha obturation gun to avoid scalding. Power off, cool it
down slightly, and push the pushing ram down.
10. After-sales service
Starting from the date of sales, if the device does not function up to standard due to
manufacturer defect, our company will be responsible for the repair of device during its warranty
period. Please refer to the warranty card for warranty period and scope.
