5
Light on the base will be yellow while battery is charging and will turn green once fully charged.
If the device is off the base, light flashes between yellow and green
Full battery charge takes approximately 2hr 30min
Notes:
Charge battery for 3 hours before first use.
Battery Indicator:
The battery indicator displays 5 grids with 1 as lowest to 5 as full battery level.
Indicator shows battery status while charging and it displays 5 grids when fully charged.
Battery should be charged when indicator shows 1 grid.
Warning:
Do not drain battery.
Always keep battery fully charged to maintain battery life.
Recharge battery if the device has not been used for more than 1 month.
2.2 Install needle
Warning:
Make sure the device is off
Allow 5 minutes for device to cool down
Screw in the gutta-percha injection needle to device
Note:
Needles of different sizes are included in the box
Use wrench in the package to fasten the needle.
Turn clockwise to tighten the needle
Note:
Turn counter-clockwise to untighten the needle
Figure 2
Figure 3
Figure 4
2. Installation
2.1 Charge device
Install the adapter plug for the power supply (Figure 2)
Plug in the power supply and connect it to the charging base (Figure 3)
Place the device on the base for charging. (Figure 4)
