9
2.4 Mounting and Moving File
File Insertion:
Lightly turn the file until it engages with the
latch mechanism, then push inward until it click.
File Removal:
Depress the push key and pull out the file.
2.5 Battery
a) Insert the power cord jack into the inlet at the back of the battery charger. (Fig. a)
b) Insert the power cord and plug in. Make sure you have the correct model. (Fig. b)
c) Turn on the power switch. Meanwhile, check if the power lamp lights up.
d) Insert the central unit into the battery charge. Charging starts with the charge mark
flashing on LCD. (Fig. c) When the buzzer sounds and is played on the LCD, charging is
completed.
•
The central unit can be charged directly by USB cable.
•
Please ensure that the central unit and the battery charger are placed in dry and clean
condition.
•
Never use the battery charger for anything other than ApexPilot All-In-One from
Beyes.
• The charging normally takes approx. 90 minutes, but it depends on battery use
conditions, battery freshness, and ambient temperature, etc.
•
Under the charging condition, the central unit is not allowed to rotate.
•
The completely discharging will cause damages of the battery. The user should
charge the battery completely once a month, or once bi-monthly, if the central unit will
not be used for a long term.
•
Pull out the central unit from the charger base up straightly after the battery fully
charged.
Warning
When the central unit is charging, but the buzzer does not sound and the charging
animation is not displayed, please take the central unit out from the battery charger, and
check the“ERROR CODE” to find out the problem.
