14
4.1.2 QS quick start key setting
First step:
Enter the setting:
• Long press “P” to enter Quick Start Key mode setting when the power
is off.
—
There are 6 parameters for setting, to press “P” can change the
parameters from 6 to 1, and cycle
Second step:
set the speed and torque for the forward rotate
• Press “P” to select parameters 6, speed coruscate, press +/- to select
clockwise rotation speed
• Press “P” to select parameters 5, torque coruscate, press +/- to select
clockwise torque
Third step:
set the speed and torque for reciprocating
• Press “P” to select parameters 4, speed coruscate, press +/- to select
reciprocating rotation speed
• Press “P” to select parameters 3, torque coruscate, press +/- to select
reciprocating torque
Forth step:
set direction of reciprocating mode
•
Press “P” to select parameters 2
• Press +/- to select arrow direction
Fifth step:
apex locator control motor
• Press “P” to select parameters 1
• press +/- to select
Exit setup:
Setting parameters will be saved automatically
When setting, Press ON/OFF to enter Quick Start mode, and work with
parameter settings above: Press POWER to enter traditional working
mode.
4.2 Integrated Apex Locator
ApexPilot All-In-One is equipped with an integrated apex locator. It can
be used in the following two ways: Combined length determination by
using the contra angle and lip clip (determination with the rotating file)
and the stand alone determination using the separate file clamp and lip
clip, which excludes the contra angle and is recommended with manual
files.
Press this key
for long time
Reciprocating mode, rotate
clockwise 300°,anti-clockwise 30
Reciprocating mode, rotate
anti-clockwise 300°, clockwise 30
Apex locator control motor
Apex locator and motor working
independently
Only motor
