22
Reciprocating
or
The load is lower than
the torque limit value
clockwise and anticlockwise
(reciprocating).
The load is higher than the set torque limit value, motor
will exit the root canal automatically, The exiting direction
is opposite to the direction of reciprocating cutting: if
reciprocating is 270 clockwise, 30 anticlockwise, exiting
direction is opposite. Vice versa
Notice
• Under the reciprocating mode, only 16:1 or 20:1 is supported. The setting must be
according to the actual contra angle.
• To set the reciprocating rotation/direction, please see 5.1 QS (Quick Start) function
settings.
4.3.2 Differences in modes of rotation settings
• Press and hold the SELECT Key for 1 second or longer
•
Enter the Rotation Mode selection: the sequence will be, Auto-Reverse, Auto-Stop,
Auto- Reverse off, and finally Reverse-Reciprocating, in circle: adjust the value by
press + or -.
• To quit the ‘Rotation Mode selection’;
1. Press "S";
2. Press "ON/OFF";
3. Press "P" to quit.
