Beyerdynamic UNITE CR, Быстрый старт

Страница: 16 / 36

Unite CR – Cockpit Rack
16
5.5 Automatic Firmware Update
• By using the Unite Cockpit Rack you can upload firmware updates to Unite transmitters/receivers.
• With the current factory setting the Unite Cockpit Rack will automatically update the firmware of the Unite
transmitters/receivers during the
first charging process. Just insert the transmitters/receivers into the charging
compartments.
During the firmware update the status indicator light of the Unite transmitters/receivers will illuminate red. This
process will take approx. 5 minutes. Should the process take longer than 10 minutes, turn the Unite Cockpit Rack off
and on again. The update process will then restart.
Attention:
Please note that after a successful update to a new firmware version, the Unite transmitters/receivers are no longer
compatible with older firmware versions.
5.6 Conditioning the battery
• In order to achieve the maximum capacity of the battery, we recommend discharging the transmitters/receivers
completely to carry out a complete charging cycle afterwards.
• This also increases the accuracy of the battery indicator on the display of the Unite transmitters/receivers.
5.7 Service mode
• For maximum operational reliability, the Unite Cockpit Rack features a so-called service mode.
• If the device is disconnected from the mains within 45 seconds after being switched on (e.g. by accidental
switching off), the device will boot in a safety mode and check itself.
• If this service mode is activated automatically (after booting unsuccessfully), the system will return to its usual
operating mode after approx. 3 minutes.