Beyerdynamic MCW-D 50, Руководство по эксплуатации

Страница: 41 / 74

Setting up
E
41
6. CD 10 Charger in CC 10 Case
• With the integrated CD 10 charger in the CC 10 transport case, it is possible to charge a maximum of 10 microphone units.
The battery state can be seen from the outside through a window.
• The CC 10 transport case can be extended with more CD 10 chargers for 10 microphone units each.
The CD 10 charger has a compartment for storing accessories such as headphones.
6.1 First Use
• To achieve a 100% battery capacity all microphone units should have 2 complete charging cycles (charging and discharging)
at least. Only after several charging and discharging cycles the rechargeable batteries will achieve their full capacity.
5.3 Request-to-Talk Mode
• This operating mode is only possible in conjunction with a PC using the
MCW-D 50 Conference software or media control system (AMX ® ,
Crestron ® , Cue etc.).
• The request-to-talk is registered in the system by pressing the micro-
phone button of the microphone unit.
• The allocation is made by the operator at the PC or touch screen of the
media control system.
• The LED is illuminated red to indicate the request-to-talk.
• If you press the microphone button again the request-to-talk is
cleared. The LED goes out.
Delegate microphone unit
6.2 Charging Process
1. Connect the charger to AC power and switch it on. The switch will illuminate.
2. Put the switched-off microphone units into the charging compartments. If microphone units are switched on, they are
switched off automatically. When the microphone units are used again, they must be switched on.
3. The charging process is indicated by the gooseneck LED ring and can be seen from the outside through a window.
a) Gooseneck LED ring is flashing red . . . . . . . . . . . . . . . Battery is charged
b) Gooseneck LED ring illuminates red permanently . . . . Battery is full
c) Gooseneck LED ring is flashing red rapidly . . . . . . . . . Error
Note:
• If an error has occurred, try to start the charging process once again. If the LEDs are still flashing rapidly, please contact
your beyerdynamic dealer.
• The charging time is around 2 hours when the battery is completely empty.
• After some time the capacity of the rechargeable batteries is reduced technically. This will reduce the operating time.
• It is normal that the rechargeable batteries are heated up during the charging process.
• Clean the charging contacts with spirit or isopropyl alcohol from time to time.
7
8
8
7
7
8