Beyerdynamic MCW-D 50, Руководство по эксплуатации

Страница: 30 / 74

MCW-D 50 Control Unit
E
30
T
hank you for selecting the MCW-D 50 Digital wireless conference system. Please take some time to read carefully through this
manual before setting up the equipment.
This manual describes the installation and operation of the system
without control and configuration via PC.
The following components are needed for the operation of a system without PC:
• MCW-D 50 control unit
• MCW-D 521 delegate microphone unit
• MCW-D 523 chairman microphone unit
The MCW-D 50 control unit is available in two versions:
MCW-D 50-3 for discussions with a maximum of 3 participants (e.g. 2 delegates and 1 chairman) speaking simultaneously.
MCW-D 50-9 for discussions with a maximum of 9 participants (e.g. 7 delegates and 2 chairmen) speaking simultaneously.
For more information about the control and configuration of the MCW-D 50 system via PC please refer to the MCW-D 50
Conference Software manual.
3. MCW-D 50 Control Unit
The MCW-D 50 control unit is the heart of the system. It controls the delegate and chairman microphone units. With the
standard version of the MCW-D 50 control unit a maximum of 3 speakers (e.g. 2 delegates and 1 chairman) can speak
simultaneously.
3.1 Controls and Indicators
Front
1 2 3 4 5
Control Unit
FCC ID: OSDMCWD50
Canada: IC: 3628A-MCWD50
Microphone Units
FCC ID: OSDMCWD5xx
Canada: IC: 3628A-MCWD5xx
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
In accordance with FCC requirements, changes or modifications not expressly approved by beyerdynamic GmbH & Co. KG could
void the user’s authority to operate this product. Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.