Beyerdynamic MCW-D 50, Руководство по эксплуатации

Страница: 37 / 74

Microphone Units
E
37
Gooseneck microphone with illuminated ring
Loudspeaker
LED to indicate the function (green/red)
Microphone button
Clear button to clear the delegate microphone units
Function button for optional functions (refer also to chapter 6.2)
Top view MCW-D 523 chairman microphone unit
4.1.2 Switching on / off
Delegate Chairman
Switching on
• The microphone units have no separate on/off switch. They are
switched on and off with the microphone button .
• By pressing the button briefly , the microphone unit is switched
on. The LED flashes for a moment and the green LED on
the rear is illuminated.
Switching off
• By pressing the button for more than 2 seconds the micro-
phone unit is switched off and the LED will flash twice
orange briefly.
• If you press the standby button of the MCW-D 50 control unit
for more than 3 seconds, you switch off all switched-on MCW-D
microphone units within the range of the MCW-D 50 control unit.
• Furthermore, the microphone units are switched off automatically,
when they do not receive a signal from the MCW-D 50 control
unit for more than 3 minutes.
Important:
• If the microphone unit is out of range of the MCW-D 50
control unit, the LED will flash red. After approx. 3
minutes the microphone unit will switch off automatically.
• If the system should fail to operate, i.e. the microphone
unit is switched on but no sound is heard, press the reset
button of the control unit. Should the system still fail
to operate, check the audio configuration with the
MCW-D 50 Conference Software. If the system still fails to
operate then, please contact your beyerdynamic
representative.
Important:
• With the MCW-D 50 Conference Software you can
disable manual deactivation of the microphone unit.
5
6
6
7
8
9
5
7
8 9
10
8
8
7
7
7
3
10
Bottom view MCW-D 521 / MCW-D 523
Counter-sunk Reset button
11
8
2
2
3
3
7 7
11