Beyerdynamic MCW-D 50, Руководство по эксплуатации

Страница: 36 / 74

Microphone Units
E
36
4. Delegate and Chairman Microphone Units
• At the factory each microphone unit is programmed with a different serial number so that the MCW-D 50 control unit can
control them. The serial number is printed on the bottom of each microphone unit.
• Via radio communication each microphone unit is addressed in the transmission protocol via an individual ID number. This ID
number can be changed with the MCW-D 50 Conference Software. On delivery the ID number corresponds to the last four
digits of the serial number.
• When you order more microphone units later, please inform the supplier of the configuration of the control unit and the
identity / serial numbers of the microphone units.
4.1 MCW-D 521 / 523 Microphone Units
4.1.1 Controls and Indicators
Important:
• The charging contacts of the microphone units can cause damages, injuries or fire damages if they come into
contact with conductive materials such as jewelry, keys or chains. This can lead to a closed circuit and heat up the material.
• To avoid overstretching and premature wear and tear, always adjust the gooseneck microphone via the
lower flexible part of the microphone and never the microphone head or rigid tube. The gooseneck can
only be bent 90° at maximum.
• If the microphone units are to be operated by an external power supply, you can use the CA 2457 power supply/
charger only.
Charging contacts for CC 10, CD 10 charger
DC socket for charging the microphone unit and for DC operation
Operating control LED (green / red)
Stereo jack socket (3.5 mm) to connect recorders or headphones
(e.g. DT 1)
Rear view
Gooseneck microphone with illuminated ring
Loudspeaker
LED to indicate the function (green/red)
Microphone button
Top view MCW-D 521 delegate microphone unit
1
1
2
3
4
5
6
7
8
2 3 4
5
6
7
8